Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0417 invalid data received from park brake control module

DTC DETECTING CONDITION:

Data from VDCCM is faulty.

TROUBLE SYMPTOM:

ABS warning light and VDC warning light illuminate.

STEPCHECKYESNO

1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.

Was the basic diagnostic procedure performed up to STEP 8-

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0417 INVALID DATA RECEIVED FROM PARK BRAKE CONTROL MODULE

Perform the basic diagnostic procedure. Basic Diagnostic Procedure

2.CHECK DTC.

Check the displayed DTC.

Are DTCs other than U*** displayed-

Perform the diagnosis according to DTC.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0417 INVALID DATA RECEIVED FROM PARK BRAKE CONTROL MODULE

3.CHECK DTC.

Check the displayed DTC.

Is DTC for the bus off or the data no-receive displayed-

Perform the diagnosis according to DTC.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0417 INVALID DATA RECEIVED FROM PARK BRAKE CONTROL MODULE

4.CHECK DTC.

Check the displayed DTC.

Is U0417 a current malfunction-

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0417 INVALID DATA RECEIVED FROM PARK BRAKE CONTROL MODULE

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0417 INVALID DATA RECEIVED FROM PARK BRAKE CONTROL MODULE

5.CHECK DTC.

1) Turn the ignition switch to OFF.

2) Disconnect the VDC CM connector.

3) Connect the disconnected connectors.

4) Read the DTC using Subaru Select Monitor.

Is U0417 a current malfunction-

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0417 INVALID DATA RECEIVED FROM PARK BRAKE CONTROL MODULE

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0417 INVALID DATA RECEIVED FROM PARK BRAKE CONTROL MODULE

6.CHECK DTC.

Using the Subaru Select Monitor, read DTC of all the systems.

Is the VDC data abnormal detected in several modules-

Replace the VDC CM. VDC Control Module and Hydraulic Control Unit (VDCCM&H/U)

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0417 INVALID DATA RECEIVED FROM PARK BRAKE CONTROL MODULE

7.REPLACE MODULE.

1) Replace the VDC CM.

2) Read the DTC using Subaru Select Monitor.

Is U0417 a current malfunction-

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0417 INVALID DATA RECEIVED FROM PARK BRAKE CONTROL MODULE

System is normal.

8.CHECK MODULE.

1) Reinstall the VDC CM.

2) Replace the module that the DTC has been detected.

3) Read the DTC using Subaru Select Monitor.

Is U0417 a current malfunction-

Replace the VDC CM. VDC Control Module and Hydraulic Control Unit (VDCCM&H/U)

System is normal.

9.CHECK HARNESS.

1) Shake the harness, and check for poor contact.

2) Using the Subaru Select Monitor, read DTC of CAN system.

Is U0417 a current malfunction-

Repair the poor contact of harness, or replace the harness.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0417 INVALID DATA RECEIVED FROM PARK BRAKE CONTROL MODULE

10.CHECK CONNECTOR.

Check the connector used for high speed CAN for poor contact.

Is there poor contact of connector-

Repair the connector that has poor contact, or replace harness.

It is possible that temporary poor communication occurs. Delete the DTC.

Dtc u0420 invalid data received from power steering control module
DTC DETECTING CONDITION:Defective data was transmitted from EPS CM.TROUBLE SYMPTOM:Cooperation control with EPS CM does not operate properly.STEPCHECKYESNO1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCED ...

Dtc u0416 invalid data received from vehicle dynamics control module
DTC DETECTING CONDITION:Data from VDCCM is faulty.TROUBLE SYMPTOM:ABS warning light and VDC warning light illuminate.STEPCHECKYESNO1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.Was the basic diagno ...

Other materials:

Installation
1. Install the crankshaft position sensor to the cylinder block, and connect the connector to the crankshaft position sensor.Tightening torque:6.4 N·m (0.7 kgf-m, 4.7 ft-lb)2. Install the service hole plug.3. Install the throttle body. Throttle Body > INSTALLATION4. Install the air intake bo ...

© 2017-2024 Copyright www.sulegacy.com