Honda Civic manuals

Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0131 lost communication with power steering control module

DTC DETECTING CONDITION:

No data is received from power steering CM.

TROUBLE SYMPTOM:

Cooperation control with power steering CM does not operate properly.

STEPCHECKYESNO

1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.

Was the basic diagnostic procedure performed up to STEP 8-

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0131 LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE

Perform the basic diagnostic procedure. Basic Diagnostic Procedure

2.CHECK DTC.

Check the displayed DTC.

Are DTCs other than U*** displayed-

Perform the diagnosis according to DTC.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0131 LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE

3.CHECK DTC.

Check the displayed DTC.

Is U0131 a current malfunction-

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0131 LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0131 LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE

4.CHECK DTC.

1) Check CAN communication circuit. CAN Communication Circuit Check

2) Read the DTC using Subaru Select Monitor.

Is U0131 a current malfunction-

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0131 LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0131 LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE

5.CHECK DTC.

Using the Subaru Select Monitor, read DTC of all the systems.

Is the electric power steering data no-receive detected in several modules-

Replace the power steering CM. Power Steering Control Module

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0131 LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE

6.REPLACE MODULE.

1) Replace the power steering CM.

2) Read the DTC using Subaru Select Monitor.

Is U0131 a current malfunction-

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0131 LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE

System is normal.

7.CHECK MODULE.

1) Reinstall the power steering CM.

2) Replace the module that the DTC has been detected.

3) Read the DTC using Subaru Select Monitor.

Is U0131 a current malfunction-

Replace the power steering CM. Power Steering Control Module

System is normal.

8.CHECK HARNESS.

1) Shake the harness, and check for poor contact.

2) Read the DTC using Subaru Select Monitor.

Is U0131 a current malfunction-

Repair the poor contact of harness, or replace the harness.

Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0131 LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE

9.CHECK CONNECTOR.

Check the connector used for high speed CAN for poor contact.

Is there poor contact of connector-

Repair the connector that has poor contact, or replace harness.

It is possible that temporary poor communication occurs. Delete the DTC.

Dtc u0140 lost communication with body control module
DTC DETECTING CONDITION:No data is received from body integrated unit.TROUBLE SYMPTOM:Cooperation control with body integrated unit does not operate properly.STEPCHECKYESNO1.CHECK PERFORMING OF BASIC ...

Dtc u0128 lost communication with park brake control module
DTC DETECTING CONDITION:No data is received from VDC CM.TROUBLE SYMPTOM:VDC CM does not operate normally.STEPCHECKYESNO1.CHECK PERFORMING OF BASIC DIAGNOSTIC PROCEDURE.Was the basic diagnostic procedu ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the cover assembly - instrument panel LWR driver. Instrument Panel Lower Cover > REMOVAL3. Remove the bolts, and then remove the panel - knee guard.4. Remove the motor - actuator mode.(1) Disconnect the connector.(2) Remove the s ...

© 2017-2024 Copyright www.sulegacy.com