Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0122 lost communication with vehicle dynamics control module

Subaru Legacy BN/BS (2015-2019) Service Manual / Engine (diagnostics)(h4do) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u0122 lost communication with vehicle dynamics control module

NOTE:

For the diagnostic procedure, refer to LAN section. Basic Diagnostic Procedure

1. OUTLINE OF DIAGNOSIS

NOTE:

For the detection standard, refer to DTC U0101. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0101 LOST COMMUNICATION WITH TCM

Dtc p000a "a" camshaft position slow response bank 1

NOTE:For the diagnostic procedure, refer to DTC P0011. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0011 "A" CAMSHAFT POSITION - TIMING OVER-ADVANCED OR SYSTEM PERFORMANCE BANK 11. ...

Dtc p0560 system voltage

DTC DETECTING CONDITION:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mod ...

Other materials:

Dtc b1013 ignition power
DTC DETECTING CONDITION:Voltage failure caused by poor contact of IGN power supply circuitsIGN voltage was outside the range of 8.3 — 16.7 V, when the IGN power supply was ON.Time Needed for Diagnosis:40 s or moreTROUBLE SYMPTOM:Symptoms such as shift lock or wiper not operating may occur.WIRING D ...