Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0164 lost communication with hvac control module

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u0164 lost communication with hvac control module

NOTE:

Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure

1. OUTLINE OF DIAGNOSIS

• Detect malfunction of CAN communication.

• Judge as NG when CAN communication failure occurs with the A/C control panel.

2. EXECUTION CONDITION

Secondary Parameters	Execution condition
Turbine shaft speed	> 0 rpm
or
D range switch	ON

3. DIAGNOSTIC METHOD

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

Judgment Value

Malfunction Criteria	Threshold Value
CAN data from A/C control panel	Lost

Time Needed for Diagnosis: 2 seconds

Dtc u0401 invalid data received from ecm/pcm "a"

NOTE:Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure1. OUTLINE OF DIAGNOSIS (ENGINE TYPE FB)• Detect malfunction of CAN communication.• ...

Dtc u0155 lost communication with instrument panel cluster (ipc) control module

NOTE:Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure1. OUTLINE OF DIAGNOSIS• Detect malfunction of CAN communication.• Judge as NG whe ...

Other materials:

Installation
1. Bring the front seat inside the vehicle.CAUTION:Be careful not to damage the body.2. Connect the connectors located under the front seat.3. Install the seat assembly.CAUTION:Tighten the slide rail assembly installing bolts in the order as shown in the figure, in several steps by gradually increas ...