Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0155 lost communication with instrument panel cluster (ipc) control module

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u0155 lost communication with instrument panel cluster (ipc) control module

NOTE:

Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure

1. OUTLINE OF DIAGNOSIS

• Detect malfunction of CAN communication.

• Judge as NG when CAN communication failure occurs with the combination meter.

2. EXECUTION CONDITION

Secondary Parameters	Execution condition
Turbine shaft speed	> 0 rpm
or
D range switch	ON

3. DIAGNOSTIC METHOD

If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.

Judgment Value

Malfunction Criteria	Threshold Value
CAN data from meter	Lost

Time Needed for Diagnosis: 2 seconds

Dtc u0164 lost communication with hvac control module

NOTE:Refer to “LAN SYSTEM (DIAGNOSTICS)” for diagnostic procedure. Basic Diagnostic Procedure1. OUTLINE OF DIAGNOSIS• Detect malfunction of CAN communication.• Judge as NG whe ...

Dtc p2770 torque converter clutch circuit high

DTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:No lock-up occurs.WIRING DIAGRAM:CVT control system CVT Control System > WIRING DIAGRAMSTEPCHECKYESNO1.CHECK HARNESS.1) Turn th ...

Other materials:

Dtc b1648 side satellite sensor bus lh initialization error
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:Side sensor LH bus line communication initialization error (open/short circuit or connector connection failure between airbag CM and side airbag sensor LH, open/short circuit or connector connection failure between si ...