Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0416 invalid data received from vehicle dynamics control module

Subaru Legacy BN/BS (2015-2019) Service Manual / Engine (diagnostics)(h6do) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u0416 invalid data received from vehicle dynamics control module

NOTE:

For the diagnostic procedure, refer to LAN section. Basic Diagnostic Procedure

1. OUTLINE OF DIAGNOSIS

NOTE:

For the detection standard, refer to DTC U0402. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0402 INVALID DATA RECEIVED FROM TCM

Dtc u0423 invalid data received from instrument panel cluster control module

NOTE:For the diagnostic procedure, refer to LAN section. Basic Diagnostic Procedure1. OUTLINE OF DIAGNOSISNOTE:For the detection standard, refer to DTC U0402. Diagnostic Procedure with Diagnostic Tr ...

Dtc u0402 invalid data received from tcm

NOTE:For the diagnostic procedure, refer to LAN section. Basic Diagnostic Procedure1. OUTLINE OF DIAGNOSISDetect malfunction of CAN communication.Judge as NG when data received from TCM, VDC CM and c ...

Other materials:

Dtc c1732 lateral g sensor
DTC DETECTING CONDITION:• A fault is detected if the sensor signal value is not correct.• A fault is detected if the steering angle sensor signal / yaw rate sensor signal change while the lateral G sensor signal indicates a constant value.• A fault is detected if the communication ...