Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0417 invalid data received from park brake control module

Subaru Legacy BN/BS (2015-2019) Service Manual / Body control system (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u0417 invalid data received from park brake control module

Received error data from VDC CM.

NOTE:

Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE

Dtc u0423 invalid data received from instrument panel cluster control module

Received error data from combination meter.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...

Dtc u0416 invalid data received from vehicle dynamics control module

Received error data from VDC CM.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the power rear gate inner switch.(1) Release the claws and pull out the power rear gate inner switch rearward.NOTE:Insert a flat tip screwdriver wrapped with protective tape into the slit on the left.(2) Disconnect the connector a ...