Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u0422 invalid data received from body control module

Subaru Legacy BN/BS (2015-2019) Service Manual / Blind spot detection rear cross traffic alert (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u0422 invalid data received from body control module

Received error data from BIU.

NOTE:

Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE

Dtc u0423 invalid data received from instrument panel cluster control module

Received error data from combination meter.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...

Dtc u0416 invalid data received from vehicle dynamics control module

Received error data from VDC CM.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the arm assembly - windshield wiper. Front Wiper Arm > REMOVAL3. Remove the cowl panel - side and the cowl panel assembly. Cowl Panel > REMOVALCAUTION:Before removing the cowl panel, use an air blower and nylon brush to sweep gr ...