Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u1140 lost communication with body control module body-can

Subaru Legacy BN/BS (2015-2019) Service Manual / Auto headlight beam leveler system (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u1140 lost communication with body control module body-can

Detected when CAN data (headlights ON signal) is not received from the body integrated unit.

NOTE:

Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE

Dtc u1422 invalid data received from body control module body-can

Detected when CAN data (headlights ON signal) is invalid.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...

General description

...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the light assembly - door step.CAUTION:• Use a dry clean cloth so that no grease or water adheres to the glass portion of the bulb.• When using a flat tip screwdriver, apply protective tape or cloth and be careful not ...