Subaru Legacy BN/BS (2015-2019) Service Manual: Dtc u1422 invalid data received from body control module body-can

Subaru Legacy BN/BS (2015-2019) Service Manual / Auto headlight beam leveler system (diagnostics) / Diagnostic procedure with diagnostic trouble code (dtc) / Dtc u1422 invalid data received from body control module body-can

Detected when CAN data (headlights ON signal) is invalid.

NOTE:

Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE

Dtc u0122 lost communication with vehicle dynamics control module

Detected when CAN data (vehicle speed signal) is not received from VDC.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...

Dtc u1140 lost communication with body control module body-can

Detected when CAN data (headlights ON signal) is not received from the body integrated unit.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Procedure > PROCEDURE ...

Other materials:

Sliding moonroof
"OPEN/CLOSE" switch Open Close Press the rear side of the "OPEN/CLOSE" switch to open the moonroof. The sun shade will also be opened together with the moonroof. For Outback, the moonroof will stop at a position approximately 0.8 in (2 cm) away from the fully opened pos ...