Subaru Legacy BN/BS (2015-2019) Owners Manual: ECO gauge

- U.S. spec. models
- Except U.S. spec. models
The ECO gauge shows the difference
between the average rate of fuel consumption
since the trip meter was last
reset and the current rate of fuel consumption.
The ECO gauge indicates the current fuel
efficiency as shown in the following chart.

NOTE
- The ECO gauge shows only an
approximate indication.
- After resetting the trip meter, the
average rate of fuel consumption is not
shown until driving 0.6 mile (1 km).
Until that time, the ECO gauge does not
operate.
|
Normal operating range
The temperature gauge shows engine
coolant temperature when the ignition
switch is in the "ON" position.
The coolant temperature will vary in
accordance with the ...
Several of the warning and indicator lights
illuminate momentarily and then go out
when the ignition switch is initially turned
to the "ON" position. This permits checking
the operation of the bul ...
Other materials:
Inspection mode procedure
1. Turn the ignition switch to ON.2. Turn on the headlight low beam.3. Check that the beam axes move when the vehicle condition is kept for three seconds or more after the vehicle posture is changed with the vehicle stopped.4. Read the DTC and check that the DTC is not displayed. Read Diagnostic Tr ...