Subaru Legacy BN/BS (2015-2019) Owners Manual: Temperature gauge

Subaru Legacy BN/BS (2015-2019) Owners Manual / Instruments and controls / Meters and gauges / Temperature gauge

Temperature gauge

Normal operating range

The temperature gauge shows engine coolant temperature when the ignition switch is in the "ON" position.

The coolant temperature will vary in accordance with the outside temperature and driving conditions.

We recommend that you drive moderately until the pointer of the temperature gauge reaches near the middle of the range.

Engine operation is optimum with the engine coolant at this temperature range and high revving operation when the engine is not warmed up enough should be avoided.

CAUTION If the pointer exceeds the normal operating range, safely stop the vehicle as soon as possible.

Refer to "Engine overheating" 13.

Fuel gauge

The fuel gauge shows the approximate amount of fuel remaining in the tank. When the ignition switch is in the "LOCK"/ "OFF" or "ACC" position, the fuel gauge shows "E" even if the fuel tank co ...

ECO gauge

U.S. spec. models Except U.S. spec. models The ECO gauge shows the difference between the average rate of fuel consumption since the trip meter was last reset and the current rate o ...

Other materials:

Assembly
1. Install the needle bearing and snap ring to the transfer drive gear.2. Set the ST to the ball bearing inner race, then install the transfer drive gear.CAUTION:Do not apply a load in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton).NOTE:Use a new ball bearing.ST 398177700INSTALLER3. Install the ...