Subaru Legacy BN/BS (2015-2019) Service Manual: Engine coolant

Installation

1. Install the ambient sensor.2. Install the active grille shutter using the bolts securing the active grille shutter.Tightening torque:7.5 N·m (0.8 kgf-m, 5.5 ft-lb)3. Connect the connector to ...

Replacement

1. DRAINING OF ENGINE COOLANT1. Lift up the vehicle.2. Remove the under cover. Front Under Cover > REMOVAL3. Connect a hose with inner diameter of φ8 mm (0.315 in) to the drain outlet of the radi ...

Other materials:

Assembly
1. Install the plug to drive pinion retainer.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.Tightening torque:22 N·m (2.2 kgf-m, 16.2 ft-lb)2. Using the ST, install the oil seal to drive pinion retainer.NOTE:• Apply CVTF to the oil seal press-fitting surface and lip.&bul ...