Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
NOTE: When adding the engine coolant, always use SUBARU Super Coolant. 1. Park the vehicle on a level surface. 2. Check the engine coolant amount, and if the coolant level is low, check for the coolant leakage, and then add the engine coolant. (1) Make sure the engine coolant level in the reservoir tank is between “FULL” and “LOW” with the engine in a cold condition. (2) Open the radiator cap and make sure that the radiator is filled with the engine coolant up to its filler neck position. |
Adjustment
1. PROCEDURE TO ADJUST THE SUBARU SUPER COOLANT CONCENTRATIONCAUTION:Use the SUBARU Super Coolant with a 50 — 60% concentration in order to obtain maximum anti-freeze and anti-rust performance.To ad ...
Other materials:
Dtc c1732 lateral g sensor
DTC DETECTING CONDITION:• A fault is detected if the sensor signal value is not correct.• A fault is detected if the steering angle sensor signal / yaw rate sensor signal change while the lateral G sensor signal indicates a constant value.• A fault is detected if the communication ...
