Subaru Legacy BN/BS (2015-2019) Service Manual: Engine coolant temperature sensor

Installation

CAUTION:When the ECM of model with immobilizer has been replaced, be sure to perform the registration of immobilizer system. (Refer to the “REGISTRATION MANUAL FOR IMMOBILIZER”.)NOTE:When ...

Removal

1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Carefully pull up the front of collector cover at two positions (B) while moving it forward.2. ...

Other materials:

Installation
1. Install the air intake boot and connect the blow-by hose (D) to the air intake boot.2. Tighten the clamp (B) securing the throttle body to the air intake boot.3. Tighten the bolt (C) securing the air intake boot to the collector cover bracket.4. Tighten the clamp (A) securing the air cleaner case ...