Subaru Legacy BN/BS (2015-2019) Service Manual: Immobilizer control module i o signal wiring diagram

Electrical component location location

(1)Security indicator light(3)Immobilizer antenna(5)Ignition key(2)Body integrated unit(4)Combination meter(6)Immobilizer control module (C0 and C5 models) ...

Inspection mode procedure

It is possible to diagnose the DTC by performing the indicated inspection mode. After correcting the DTC, perform a necessary inspection mode and make sure that the function is resumed correctly and t ...

Other materials:

Installation
Install in the reverse order of removal while being careful of the following.1. EVAPORATION PIPE INSTALLATION1. Install the evaporation pipe to the vehicle.2. Install the evaporation pipe protector.Tightening torque:T1: 1 N·m (0.1 kgf-m, 0.7 ft-lb)T2: 7.5 N·m (0.7 kgf-m, 5.4 ft-lb)3. I ...