Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr580) / Transmission mounting system / Inspection

• Check the crossmember for bends or damage.

• Check that the cushion rubber is not stiff, cracked or otherwise damaged.

Removal

1. TRANSMISSION REAR CROSSMEMBER AND REAR CUSHION RUBBER1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle.3. Remove the center exhaust pipe. Center Exhaust Pipe > REM ...

Installation

1. TRANSMISSION REAR CROSSMEMBER AND REAR CUSHION RUBBER1. Attach the rear cushion rubber to the transmission.Tightening torque:40 N·m (4.1 kgf-m, 29.5 ft-lb)2. Install the crossmember.Tighteni ...

Other materials:

Procedure
1. MAIN-CANNOTE:• When measuring the resistance of CAN communication circuit, measure it in sleep status.To enter sleep status– With ignition switch OFF and key or switch operation stopped, keep the doors, trunk, and rear gate all closed for one minute or more.– On models with keyless ac ...