Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Oil pump / Inspection

Check the following items.

• Check the oil pump for damage and wear.

• Rotate the oil pump by hand, and check that it rotates smoothly.

1. Measure the secondary pressure. Secondary Pressure (Line Pressure) Test > INSPECTION

2. Remove the oil pan and oil strainer. Control Valve Body > REMOVAL

3. Check oil strainer for clogging.

When oil strainer has no clogging, replace the oil pump.

Removal

NOTE:Refer to “Drive Pinion Shaft” for removal procedures. Drive Pinion Shaft Assembly > REMOVAL ...

Installation

NOTE:Refer to “Drive Pinion Shaft” for installation procedures. Drive Pinion Shaft Assembly > INSTALLATION ...

Other materials:

Dtc b1827 short in side airbag lh (to ground)
DIAGNOSIS START CONDITION:Ignition voltage is 10 V to 16 V.DTC DETECTING CONDITION:GND short circuit failure (shorted to ground in main harness, shorted to ground in front seat side airbag LH, shorted to ground in airbag CM internal circuit)CAUTION:Before performing diagnosis, refer to “CAUTIO ...