Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / Oil pump chain / Inspection

• Check the oil pump chain for damage.

• Replace if gear teeth are broken, damaged, sharpen or excessively worn.

• Check the bearing for seizure or wear.

• Apply CVTF to bearing and rotate the bearing to check for noise or dragging etc.

• Check the oil pump chain cover for damage.

• Check for leakage of CVTF from the mating surface of oil pump chain cover.

• Check the oil seal for damage.

Installation

1. Clean the mating surface of oil pump chain cover and converter case cover.2. Using the ST, install the oil seal.ST 499755602PRESS SNAP RING3. Install the drive sprocket and install the snap ring ...

Disassembly

1. DRIVE SPROCKET1. Remove the ball bearing using ST.ST1 498077600REMOVERST2 399513600INSTALLER ...

Other materials:

Dtc p059f active grille air shutter "a" performance/stuck off
DTC DETECTING CONDITION:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Clear Memory Mode > OPERATION, and Inspection Mode Inspection Mode > PROCEDURE.STEPCHECKYESNO1.CHECK DTC.Check for DTC. Read Diagnosti ...