Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
1. Check that exposed length (a) of MT gear select cable is within specification. Exposed length (a) of MT gear select cable: Specification: 11 mm (0.4 in)
2. If it is not within the specification, perform the adjustment. MT Gear Select Cable > ADJUSTMENT |
Installation
CAUTION:• Always use new MT gear select cable if the cable is removed from selector lever COMPL of transmission side.• Do not bend the MT gear select cable sharply.• Do not twist the ...
Other materials:
Inspection
1. Moving the rear tire up and down by hand, check there is no backlash in bearing, and check the wheel rotates smoothly.CAUTION:If there is any fault in the bearing, replace the hub unit COMPL - rear axle.2. Inspect axial play of the hub unit bearing.(1) Remove the tire and disc rotor.(2) Inspect t ...
© 2017-2026 Copyright www.sulegacy.com
