Subaru Legacy BN/BS (2015-2019) Service Manual: Mt gear shift cable

Inspection

1. Check that exposed length (a) of MT gear select cable is within specification.Exposed length (a) of MT gear select cable:Specification: 11 mm (0.4 in)2. If it is not within the specification, perfo ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Lift up the vehicle.3. Remove the center exhaust pipe. Center Exhaust Pipe > REMOVAL4. Remove the center exhaust cover.5. Remove the cla ...

Other materials:

Installation
1. BACK-UP LIGHT AND NEUTRAL POSITION SWITCH1. Install the back-up light switch & neutral position switch with the harness.NOTE:Use a new gasket.Tightening torque:32.3 N·m (3.3 kgf-m, 23.8 ft-lb)(A)Neutral position switch(B)Back-up light switch2. Lower the vehicle.3. Connect the connectors of ...