NOTE: When adding the engine coolant, always use SUBARU Super Coolant. 1. Park the vehicle on a level surface. 2. Check the engine coolant amount, and if the coolant level is low, check for the coolant leakage, and then add the engine coolant. (1) Make sure the engine coolant level in the reservoir tank is between “FULL” and “LOW” with the engine in a cold condition. (2) Open the radiator cap and make sure that the radiator is filled with the engine coolant up to its filler neck position. |
Installation
1. SEDAN MODEL1. Install the rear turn signal light bulb. Rear Combination Light Assembly > ASSEMBLY2. Install the trunk trim panel - side.3. Connect the ground terminal to battery sensor. NOTE2. OUTBACK MODEL1. Install the rear turn signal light bulb. Rear Combination Light Assembly > ASSEMBLY2. ...