Subaru Legacy BN/BS (2015-2019) Service Manual: Cooling(h6do)

1. WATER PUMP PULLEY1. Using the ST, install the water pump pulley.ST1 18355AA000PULLEY WRENCHST2 18334AA030PULLEY WRENCH PIN SETTightening torque:14 N·m (1.4 kgf-m, 10.3 ft-lb)2. Install ...

Engine cooling system trouble in general inspection

TroublePossible causeCorrective actionOver-heatinga. Insufficient engine coolantReplenish engine coolant, inspect for leakage, and repair it if necessary.b. Defective thermostatReplace.c. Malfunction ...

Other materials:

Installation
1. Install the O-ring to front reduction drive gear.NOTE:• Use new O-rings.• Apply CVTF to the O-rings.2. While holding the torque converter assembly by hand, carefully install it into the torque converter case.NOTE:• Apply CVTF to the oil seal lip.• Do not damage the oil sea ...