Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Cooling(h6do) / Radiator fan and fan motor assembly / Inspection

Check that the radiator fan, radiator fan harness, radiator fan shroud and radiator fan motor do not have deformation, cracks or damage.

Installation

1. Position the radiator fan & fan motor assembly, and install the radiator fan & fan motor assembly to the claw on the radiator upper side.2. Connect radiator inlet hoses LH and RH to the radiator.3. ...

Disassembly

1. RADIATOR MAIN FAN AND RADIATOR MAIN FAN MOTOR1. Disconnect the connector from the radiator fan control module (main), and remove the radiator main fan motor harness from the clip (A).2. Remove the ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the clip (A), and loosen the clamps (B) and (C) securing the air intake boot.3. Remove the air intake boot from the air cleaner case (rear) and throttle body, and move it to the left side wheel apron.4. Disconnect the connector (A ...