Subaru Legacy BN/BS (2015-2019) Service Manual: Preparation tool

Subaru Legacy BN/BS (2015-2019) Service Manual / Cooling(h6do) / General description / Preparation tool

1. SPECIAL TOOL

ILLUSTRATION	TOOL NUMBER	DESCRIPTION	REMARKS
	18460AA050	CHECK BOARD	Used for inspecting the radiator fan system.
	73099SG000	SPECIAL TOOL CONDENSER	Used for removing and installing the radiator.
	— (Newly adopted tool)	SUBARU SELECT MONITOR 4	Used for setting of each function and troubleshooting for electrical system. NOTE: For detailed operation procedures of Subaru Select Monitor 4, refer to “Application help”.

2. GENERAL TOOL

TOOL NAME	REMARKS
Circuit tester	Used for measuring resistance, voltage and current.
Radiator cap tester	Used for checking radiator and radiator cap.
DST-i	Used together with Subaru Select Monitor 4.

Caution

• Prior to starting work, pay special attention to the following:1. Always wear work clothes, a work cap, and protective shoes. Additionally, wear a helmet, protective goggles, etc. if necessary ...

Component

1. WATER PUMP AND WATER PIPE(1)Water pump ASSY(6)Oil pan upperTightening torque: N·m (kgf-m, ft-lb)(2)Gasket(7)ClipT1:6.4 (0.7, 4.7)(3)Thermostat(8)HoseT2:16 (1.6, 11.8)(4)Gasket(9)Water return ...

Other materials:

Disassembly
1. RADIATOR MAIN FAN AND RADIATOR MAIN FAN MOTOR1. Disconnect the connector from the radiator fan control module (main), and remove the radiator main fan motor harness from the clip (A).2. Remove the radiator main fan from the radiator main fan motor.3. Remove the radiator main fan motor from the ra ...