Subaru Legacy BN/BS (2015-2019) Service Manual: Removal
1. Drain engine coolant. Engine Coolant > REPLACEMENT 2. Disconnect the radiator outlet hose from thermostat cover.
3. Remove the thermostat cover, and then remove the thermostat and gasket.
|
Thermostat
...
Inspection
1. Check that the thermostat does not have deformation, cracks or damage.2. Check that the thermostat valve closes completely at an ambient temperature.3. Immerse the thermostat and a thermometer in w ...
Other materials:
Installation
1. Apply a coat of spray type lubricant to the mating area of cushion rubber.2. Install the rear exhaust pipe to cushion rubber.NOTE:After assembling, degrease the lubricant which was applied to the cushion rubber while removing/installing.3. Install the bolts and self-locking nuts which secure the ...
© 2017-2026 Copyright www.sulegacy.com
