Check that there is no leakage from front oil seal portion. If there is any leakage replace the oil seal and inspect the propeller shaft. |
ReplacementInstallation
1. CLUTCH SWITCH1. Install the clutch switch.2. Move the clevis pin of push rod to left and right, retain it at the position where it moves smoothly, and measure the clutch pedal stroke.Clutch pedal full stroke A:130 — 135 mm (5.12 — 5.31 in)Tightening torque:T: 8 N·m (0.8 kgf-m, 5.9 ft-l ...