Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Fuel injection (fuel systems)(h6do) / Pulsation damper / Inspection

Check that the pulsation damper has no deformation, cracks or other damages.

Removal

WARNING:Place “NO OPEN FLAMES” signs near the working area.1. PULSATION DAMPER RH1. Remove the collector cover.(1) Carefully pull up the rear of collector cover at two positions (A).(2) Ca ...

Installation

1. PULSATION DAMPER RH1. Install the pulsation damper RH to the fuel injector pipe RH.NOTE:Use a new gasket.Tightening torque:21.6 N·m (2.2 kgf-m, 15.9 ft-lb)2. Install the fuel pipe protector ...

Other materials:

Installation
CAUTION:• Be sure to prevent water or oil from contacting the connector terminal of secondary speed sensor. If adhesion occurs, replace with a new part.• After installing the secondary speed sensor, adjust the CVTF level.1. Install the secondary speed sensor.NOTE:• Use new O-rings. ...