Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Lubrication(h4do) / Oil pressure switch / Inspection

1. Check that the oil pressure switch does not have deformation, cracks or damage.

2. Check the oil pressure switch installation portion for oil leakage and oil seepage.

Removal

CAUTION:If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire.1. Disconnect the ground terminal from battery sensor. NOT ...

Installation

1. Apply liquid gasket to the oil pressure switch threads.Liquid gasket:THREE BOND 1324 (Part No. 004403042) or equivalent2. Install the oil pressure switch to the chain cover, and connect the connect ...

Other materials:

Installation
CAUTION:Make sure that there is a gasket attached on the clip of the garnish assembly. If a gasket is not attached, water leakage may occur.1. Install the garnish assembly - rear gate.Tightening torque:4.5 N·m (0.5 kgf-m, 3.3 ft-lb)2. Install the cover - rear gate.Tightening torque:1.5 N&midd ...