Subaru Legacy BN/BS (2015-2019) Service Manual: Removal

Subaru Legacy BN/BS (2015-2019) Service Manual / Lubrication(h4do) / Oil pressure switch / Removal

CAUTION:

If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire.

1. Disconnect the ground terminal from battery sensor. NOTE

2. Disconnect the connector (A) from the oil pressure switch, and remove the oil pressure switch from the chain cover.

CAUTION:

Catch the engine oil using cloth to prevent it from splashing.

Inspection

1. Check that the oil pressure switch does not have deformation, cracks or damage.2. Check the oil pressure switch installation portion for oil leakage and oil seepage. ...

Other materials:

Disassembly
1. Using the ST, remove the taper roller bearing (extension case side).ST 498077000REMOVER(A)Taper roller bearing (extension case side)2. Using ST1 and ST2, remove the taper roller bearing (transfer case side).ST1 498077000REMOVERST2 899864100REMOVER(A)Taper roller bearing (transfer case si ...