Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Emission control (aux. Emission control devices)(h4do) / Egr cooler / Inspection

Check that the EGR cooler has no deformation, cracks or other damages.

Removal

1. Fully open the front hood. NOTE2. Remove the V-belt covers.3. Remove the clip (A), and loosen the clamps (B) and (C) securing the air intake boot.4. Remove the air intake boot from the air cleaner ...

Installation

1. Install the engine coolant hose to the EGR cooler.• CVT model• MT model2. Install the gasket (A) to the stud bolt.NOTE:Use a new gasket.3. Set the EGR cooler, and temporarily tighten th ...

Other materials:

Removal
NOTE:Refer to “Security and Locks” section for key cylinder replacement. Key Lock Cylinders > REMOVAL1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the pocket assembly.(1) Remove the damper COMPL - pocket.(2) Release the stoppers and remove the pocket assembly by ...