Subaru Legacy BN/BS (2015-2019) Service Manual: Emission control (aux. Emission control devices)(h4do)

Installation

1. Install the starter relay to the relay block.2. Install the instrument panel lower cover. Instrument Panel Lower Cover > INSTALLATION3. Connect the ground terminal to battery sensor. NOTE ...

Canister

...

Other materials:

Installation
1. Install the starter to the transmission.NOTE:Tighten the starter and bracket (a) together using the upper bolt securing the starter.Tightening torque:50 N·m (5.1 kgf-m, 36.9 ft-lb)2. Connect the connector (A) to the starter, and install the terminal (B).Tightening torque:10 N·m (1.0 ...