Subaru Legacy BN/BS (2015-2019) Service Manual: Purge control solenoid valve

Installation

1. Install the PCV valve onto the cylinder block RH.NOTE:Apply liquid gasket to the bolt threads of PCV valve.Liquid gasket:THREE BOND 1324 (Part No. 004403042) or equivalentTightening torque:25 N&mid ...

Removal

1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the bolt securing the purge control solenoid valve onto intake manifold assembly.NOTE:Hold the purge control solenoid valve unit b ...

Other materials:

Installation
CAUTION:• Be sure to prevent water or oil from contacting the connector terminal of secondary pressure sensor. If adhesion occurs, replace with a new part.• After installing the secondary pressure sensor, adjust the CVTF level.1. Install the secondary pressure sensor.NOTE:• Use new ...