Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Emission control (aux. Emission control devices)(h4do) / Pcv valve / Installation

1. Install the PCV valve onto the cylinder block RH.

NOTE:

Apply liquid gasket to the bolt threads of PCV valve.

Liquid gasket:

THREE BOND 1324 (Part No. 004403042) or equivalent

Tightening torque:

25 N·m (2.5 kgf-m, 18.4 ft-lb)

2. Connect the PCV hose to the intake manifold assembly and the PCV valve.

3. Install the air intake boot. Air Intake Boot > INSTALLATION

Inspection

1. PCV VALVE1. Check that the PCV valve has no deformation, cracks or other damages.2. Check that air is discharged from (B) when air is blown into (A).3. Check that air does not come out from (B) whe ...

Purge control solenoid valve

...

Other materials:

Dtc b2a02 lte2 antenna circuit
DIAGNOSIS START CONDITION:When ignition switch is ON.DTC DETECTING CONDITION:Any of the followings continues for 5 seconds or more.• LTE2 impedance is more than 1 M-. (Detached antenna, etc.)• LTE2 impedance is less than 1 k-. (Short-circuited antenna, etc.)TROUBLE SYMPTOM:• Telema ...