Subaru Legacy BN/BS (2015-2019) Service Manual: Rear catalytic converter

Installation

1. Install the vacuum hose to the purge control solenoid valve.2. Connect the vacuum hose (A) and connector (B) to the purge control solenoid valve.3. Install the bolt securing the purge control solen ...

Removal

The rear catalytic converter is integrated into the center exhaust pipe; therefore, refer to “Center Exhaust Pipe” for the removal procedure. Center Exhaust Pipe > REMOVAL ...

Other materials:

Assembly
NOTE:After assembling, manually turn the pulley to check that the rotor rotates smoothly.1. Use the following procedures to install the rectifier.(1) Remove old silicone grease on the mating surface of rear cover and rectifier and apply new silicone grease.CAUTION:Do not apply silicone grease to the ...