Subaru Legacy BN/BS (2015-2019) Service Manual: Egr pipe

Installation

1. Install the engine coolant hose to the EGR cooler.• CVT model• MT model2. Install the gasket (A) to the stud bolt.NOTE:Use a new gasket.3. Set the EGR cooler, and temporarily tighten th ...

Removal

1. Remove the clip (A), and loosen the clamps (B) and (C) securing the air intake boot.2. Remove the air intake boot from the air cleaner case (rear) and throttle body, and move it to the left side wh ...

Other materials:

Inspection
1. CRANKSHAFT POSITION SENSOR1. Disconnect the ground terminal from battery sensor. NOTE2. Prepare an oscilloscope.3. While pressing the section (A) shown in the figure, move the lock lever (B) in the direction of the arrow to disconnect the connectors from the ECM in numerical order as shown in th ...