Subaru Legacy BN/BS (2015-2019) Service Manual: Read diagnostic trouble code (dtc) operation
1. On «Start» display, select «Diagnosis». 2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed». 3. On «Main Menu» display, select «Each System». 4. On «Select System» display, select «Infotainment» and select «Enter». 5. On «Select Function» display, select «DTC». NOTE: • For detailed operation procedures, refer to “Application help”. • For details concerning DTC, refer to List of Diagnostic Trouble Code (DTC). List of Diagnostic Trouble Code (DTC) |
List of diagnostic trouble code (dtc) list
DTCItemNoteB2240CAN COMMUNICATION (AUDIO) STUCK Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC B2240 CAN COMMUNICATION (AUDIO) STUCKB2241CAN COMMUNICATION Diagnostic Procedure with Diag ...
Service diagnostics mode operation
NOTE:Contents indicated in this section generally describe inspection procedures to be performed when Subaru Select Monitor cannot be used. However, some of the inspections described here cannot be pe ...
Other materials:
Dtc c1571 brake lamp relay off stuck
DTC DETECTING CONDITION:A fault is detected if the stop light relay operation request were compared with the feedback signal and detected as follows:• The feedback signal is OFF.• The stop light relay operation request is ON.TROUBLE SYMPTOM:• EyeSight does not operate. (Models with ...
