Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Emission control (aux. Emission control devices)(h4do) / Egr pipe / Inspection

Check that the EGR pipe has no deformation, cracks or other damages.

Removal

1. Remove the clip (A), and loosen the clamps (B) and (C) securing the air intake boot.2. Remove the air intake boot from the air cleaner case (rear) and throttle body, and move it to the left side wh ...

Installation

1. Install the EGR pipe to the intake manifold assembly and EGR control valve.NOTE:Use a new gasket.Tightening torque:6.4 N·m (0.7 kgf-m, 4.7 ft-lb)2. Install the throttle body. Throttle Body ...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the cover assembly - column.(1) Remove the clips, and remove the cover - column.(2) Remove the screws by turning the steering wheel to right and left.(3) Release the claw, and remove the cover assembly - column UPR and the cover a ...