Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Exhaust(h6do) / Front exhaust pipe / Inspection

1. Check the connections and welded parts for exhaust leaks.

2. Make sure there are no holes or rusting.

Installation

1. Install the front exhaust pipe assembly.NOTE:Use a new gasket.2. Temporarily tighten the nuts which hold front exhaust pipe assembly to cylinder heads.3. Install the bolts, springs and nuts securin ...

Disassembly

1. Separate the front exhaust pipe (RH) from the front exhaust pipe (LH).2. Remove the front oxygen (A/F) sensor and rear oxygen sensor from front exhaust pipe assembly. Front Oxygen (A/F) Sensor > R ...

Other materials:

Inspection
NOTE:When adding the engine coolant, always use SUBARU Super Coolant.1. Park the vehicle on a level surface.2. Check the engine coolant amount, and if the coolant level is low, check for the coolant leakage, and then add the engine coolant.(1) Make sure the engine coolant level in the reservoir tank ...