Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Exhaust(h6do) / Rear exhaust pipe / Inspection

1. Check the connections and welded parts for exhaust leaks.

2. Make sure there are no holes or rusting.

3. Check the cushion rubber for wear or crack.

Removal

CAUTION:Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.1. Lift up the vehicle.2. Remove the bolts, springs and nuts securing the front exhaust pipe as ...

Installation

1. Apply a coat of spray type lubricant to the mating area of cushion rubber.2. Install the rear exhaust pipe to cushion rubber.NOTE:After assembling, degrease the lubricant which was applied to the c ...

Other materials:

Installation
1. Clean the mating surface of transmission case and converter case.2. Select the reduction gear shim. Reduction Drive Gear > ADJUSTMENT3. Remove the transmission case, and install the selected reduction gear shim to the reduction drive gear.4. Install the O-rings to the reverse clutch housing and ...