Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection
1. BASIC INSPECTION Before performing the diagnosis, check the following items which may cause problems relating the wiper or light. 1. Check the battery. Battery > INSPECTION Battery > INSPECTION 2. Check the relay and fuse condition. Relay and Fuse 3. Check the connecting condition of harness and harness connector. 2. FUNCTION CHECK AUTO HEADLIGHT BEAM LEVELER SYSTEM 1. Turn the ignition switch to ON. 2. Turn on the headlight low beam. 3. Check that the beam axes move when the vehicle condition is kept for three seconds or more after the vehicle posture is changed with the vehicle stopped. |
Caution
1. AIRBAG SYSTEMCAUTION:• Do not use the electrical test equipment on the airbag system wiring harnesses and connector circuits.• Be careful not to damage the airbag system wiring harness. ...
Other materials:
List
Item NameContentsStandardNoteTrip CountTime stamp information, trip counter — — CountTime stamp information, original counter identification information — — Time CountTime stamp information, time counter — — R Sensor SignalOutput voltage value from rear vehicle height sensorApprox. 2. ...
