Subaru Legacy BN/BS (2015-2019) Service Manual: Inspection

Subaru Legacy BN/BS (2015-2019) Service Manual / Blind spot detection rear cross traffic alert / Blind spot detection rear cross traffic alert / Blind spot detection rear cross traffic alert / Inspection

Refer to “Basic Diagnostic Procedure” of “Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS)” section. Basic Diagnostic Procedure

Blind spot detection rear cross traffic alert

...

Blind spot detection rear cross traffic alert

Note For procedure of each component in the Subaru Rear Vehicle Detection system, refer to the respective sections.• Radar sensor: Radar Sensor• BSD/RCTA OFF switch: Switches and Harness ...

Other materials:

Installation
1. SEDAN MODEL1. Replace the light assembly gasket with a new part.2. Install the rear finisher light assembly.3. Install the garnish - trunk.Tightening torque:4.5 N·m (0.5 kgf-m, 3.3 ft-lb)4. Install the trim panel - trunk lid.5. Connect the ground terminal to battery sensor. NOTE2. OUTBACK ...