1. Install the CVTF cooler (air cool). Tightening torque: 12 N·m (1.2 kgf-m, 8.9 ft-lb) 2. Install the CVTF cooler (air cool) inlet hose and the CVTF cooler (air cool) outlet hose. NOTE: Use new CVTF cooler (air cool) inlet hose and the CVTF cooler (air cool) outlet hose. 3. Install the headlight assembly LH. Headlight Assembly > INSTALLATION 4. Install the front bumper. Front Bumper > INSTALLATION 5. Install the battery. Battery > INSTALLATION |
InspectionInstallation
1. Temporarily install the drive plate and reinforcement drive plate.2. Set the ST.NOTE:Set the ST to the drive plate referring to the illustration.ST 498497300CRANKSHAFT STOPPER3. Tighten the drive plate mounting bolt in two stages.NOTE:Fix the engine unit.(1) Tighten the drive plate mounting bo ...