Subaru Legacy BN/BS (2015-2019) Service Manual: Cvtf cooler pipe and hose

Installation

1. Install the CVTF cooler (air cool).Tightening torque:12 N·m (1.2 kgf-m, 8.9 ft-lb)2. Install the CVTF cooler (air cool) inlet hose and the CVTF cooler (air cool) outlet hose.NOTE:Use new CVT ...

Removal

CAUTION:• Immediately after the vehicle has been running or after idling for a long time, the CVTF will be hot. Be careful not to burn yourself.• If the CVTF is spilt over exhaust pipe, wi ...

Other materials:

Disassembly
1. BUSHING A - TRAILING LINKUsing the ST, push out the bushing A - trailing link.Preparation tool:ST-A: INSTALLER (899874100)ST-B: PRESS (499755602)2. BUSHING - TRAILING LINKFor the removal procedure of bushing - trailing link, refer to “Rear Axle” in the “DRIVE SHAFT SYSTEM” ...