Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Continuously variable transmission(tr690) / X mode switch / Installation

1. Install X mode switch to the cover - shift lever.

2. Install the cover - shift lever. Console Box > INSTALLATION

3. Connect the ground terminal to battery sensor. NOTE

Inspection

1. CHECK SWITCH UNITMeasure the resistance between connector terminals of the X mode switch. Terminal No.StandardOFF (when measured without operating the switch)No. 1 — No. 41 M- or moreON (when mea ...

Control systems

...

Other materials:

Removal
1. Disconnect the ground terminal from battery sensor. NOTE2. Lock the steering wheel.3. Remove the air intake duct. Air Intake Duct > REMOVAL4. Remove the clip (A), and loosen the clamps (B) and (C).5. Remove the air intake boot from the throttle body, and move it to the left side wheel apron, et ...