Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Entertainment / External connection terminal / Installation

1. Install the unit assembly - AUX.

2. Install the pocket assembly - CTR.

3. Install the panel center LWR.

4. Install the cover assembly - front and the console box assembly.

Tightening torque:

6.5 N·m (0.6 kgf-m, 4.8 ft-lb)

5. Install the heater control assembly.

6. Connect the ground terminal to battery sensor. NOTE

Removal

1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the heater control assembly. Control Panel > REMOVAL3. Remove the cove ...

Front accessory power supply socket

...

Other materials:

System operation
Operating conditions The BSD/RCTA will operate when all of the following conditions are met. The ignition switch is in the "ON" position. The BSD/RCTA warning indicator and BSD/RCTA OFF indicator are turned off. The vehicle is driven at speeds above 6 mph (10 km/h) ...