Subaru Legacy Service Manual: Installation
1. SEDAN MODEL 1. Install the woofer assembly. Tightening torque: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb) 2. Install the trim panel assembly - rear shelf. Rear Shelf Trim > INSTALLATION 3. Connect the ground terminal to battery sensor. NOTE 2. OUTBACK MODEL 1. Install the woofer assembly. Tightening torque: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb) 2. Install the trim panel - rear apron RH. Tightening torque: 7.5 N·m (0.8 kgf-m, 5.5 ft-lb) 3. Connect the ground terminal to battery sensor. NOTE |
Removal
1. SEDAN MODEL1. Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. NOTE2. Remove the trim panel assembly - rear shelf. Rear Shelf Trim > ...
Other materials:
Outback
Undo the clips. For the method to undo
the clips, refer to "Type C clips" F11-6.
Remove the cover.
Remove the upper and lower screws.
Slide the rear combination light assembly
straight rearward and remove it
from the vehicle.
1) Rear turn signal light
2) Rear ...
