Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Fuel injection (fuel systems)(h6do) / Fuel pump relay / Installation

1. Install the fuel pump relay to the main fuse box.

2. Connect the ground terminal to battery sensor. NOTE

Inspection

1. Check that the fuel pump relay has no deformation, cracks or other damages.2. Measure the resistance between fuel pump relay terminals.Terminal No.Standard1 and 21 M- or more3 and 4130.4 — 230.8 ...

Fuel sub level sensor

...

Other materials:

Installation
1. Install the knock sensor to the cylinder block, and connect the connector (A) to the knock sensor.Tightening torque:25 N·m (2.5 kgf-m, 18.4 ft-lb)NOTE:The knock sensor should be installed so that the center of the connector is positioned as shown in the figure relative to the front of engi ...