Subaru Legacy BN/BS (2015-2019) Service Manual: Installation

Subaru Legacy BN/BS (2015-2019) Service Manual / Fuel injection (fuel systems)(h6do) / Oil temperature sensor / Installation

1. Install the oil temperature sensor to the cylinder block, and connect the connector to the oil temperature sensor.

Tightening torque:

18 N·m (1.8 kgf-m, 13.3 ft-lb)

2. Connect the ground terminal to battery sensor. NOTE

3. Install the collector cover.

Inspection

1. Check that the oil temperature sensor has no deformation, cracks or other damages.2. Check the resistance between the oil temperature sensor terminals.Terminal No.Standard1 and 2Approx. 2.45±0.2 k ...

Pulsation damper

...

Other materials:

Removal
CAUTION:If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emission of smoke or causing a fire.1. Disconnect the ground terminal from battery sensor. NOTE2. Remove the air intake duct. (RH side only) Air Intake Duct > REMOVAL3. Disconnect the connector ...