Subaru Legacy BN/BS (2015-2019) Service Manual: Installation
1. REAR HEATER DUCT CAUTION: Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION 1. Install the duct - rear heater. 2. Install the floor mat. Floor Mat > INSTALLATION 3. Connect the ground terminal to battery sensor. NOTE 2. CONSOLE DUCT 1. Install the console duct. 2. Install the instrument panel assembly. (Front) Instrument Panel Assembly > INSTALLATION 3. Install the cover assembly - front and the console box assembly. Console Box > INSTALLATION Tightening torque: 6.5 N·m (0.7 kgf-m, 4.8 ft-lb) 4. Connect the ground terminal to battery sensor. NOTE |
Inspection
1. Check installation condition of duct. Connect the duct properly if defective.2. Check that no foreign matter is mixed in the duct. Remove the foreign matter if any. ...
Heater vent duct
...
Other materials:
Replacement
1. Shift the select lever or gear shift lever to neutral.2. Release the parking brake.3. Lift up the vehicle.4. Drain differential gear oil. Differential Gear Oil > REPLACEMENT5. Remove the rear exhaust pipe.• 2.5 L model Rear Exhaust Pipe > REMOVAL• 3.6 L model Rear Exhaust Pipe > REMO ...
